The panels can be any size you like, limited only by the size of your laminating table. i found for best time efficiency, i would make the largest size panels possible, and if i needed smaller panels than this, i would cut them out of the large panels with a circular saw- just like plywood.. The foam pads are easy to cut from leftover foam and eliminate the need for the putty fillets used in stitch and glue. when some parts of the hull require additional stiffeners, they are made from foam strips, trapezoidal section, covered by fiberglass tape.. Foam core board kits contain the foam core that you will need to sand and sculpt to final shape before glassing, resin, glass, finbox, and other components needed to build the board. stitch and glue kits include precut wood parts, instruction manual, glassing supplies, epoxy resin, fiberglass cloth, fin box, fin, and deck pad..
16′ 6″ mill creek plywood stitch and glue kayak – chris silverwood 16′ 6″ mill creek stitch and glue foam core kayak – ros downs 17′ glen l ski king – jonathon clark. Type of construction and materials used. i use stitch-and-glue construction to form what’s called a “composite boat”. i start with either marine plywood or foam-core, from which side panels, bulkheads, and the floor are cut.. Foam sandwich construction - part 1. foam sandwich for amateurs - part one: overview (stitch and glue composite) method will recognize the procedure. the specifications for the jig such as the number and spacing of molds and the use of battens depends on the type of core materials: foam sheets or foam strips..
0 komentar:
Posting Komentar